The Device section displays information related to the device's hardware. This page is an overview on the Device section of BEAM iSERIES devices.

Device Information

The figure bellow is an example of the Device section and the table below provides explanations on the fields contained in that section:

 Field Name
 Serial number  A unique 10-digit device identifier. It is required when connecting the device to the Remote Management System (RMS). The device can be added to RMS via the System → Administration → RMS page
 Product code  a.k.a., ordering code, displays under which product code the device was manufactured. Different product codes indicate different versions of the overall product. For example, devices with different product codes may support different LTE bands, come with different accessories, different firmware, etc.
 Batch number  A 4-digit number that indicates the batch of materials
 Hardware revision  A 4-digit number representing the router's hardware revision version
 IMEI  The IMEI (International Mobile Equipment Identity) is a unique 15 decimal digit number used to identify mobile modules. GSM network operators use the
 IMEI to identify devices in their networks
 IMSI  The IMSI (international mobile subscriber identity) is a unique 15 decimal digit (or less) number used to identify the user of a cellular network
 Wireless MAC address  The media access control (MAC) address is a unique identifier used to distinguish a network interface controller for communication in the data link layer
 (OSI layer 2). This field displays the MAC address of the device's wireless radio
 Model  The modem's model number
 FW version  Modem's current firmware version