BEAM iSERIES WebUI - SMS Utilities




Summary

BEAM iSERIES routers have an extensive amount of various SMS control utilities. SMS Utilities can be used to set/get configurations, monitor and issue commands to the router.

SMS Utilities

Default Rules

The SMS Utilities section contains a list of rules that perform certain actions when they are activated by SMS messages.


The figure above is an illustration of the SMS Utilities rules list. The entire list contains 22 rules but you are also be provided with the possibility to configure custom ones.

All default configuration options are listed below:

  • Reboot
  • Get status
  • Get I/O status
  • Get OpenVPN status
  • Switch WiFi on / off
  • Switch mobile data on / off
  • Manage OpenVPN on / off
  • Change mobile data settings
  • Get list of profiles
  • Change profile
  • SSH access control
  • Web access control
  • Restore to default
  • FW upgrade from server
  • Config update from server
  • Switch monitoring on / off
  • Monitoring status
  • UCI API

Execution

To execute a rule, just send an SMS message to the router‘s SIM card number with the rule's SMS Text, e.g., if you send a message with the text “reboot”, the router will reboot provided the selected Authorization method is “No authorization”. However, if there is an Authorization method present you will need to include the “Authorization key” in the text message. This “Authorization key” depends on the chosen Authorization method, i.e., if the method is “By serial”, the “Authorization key” is the router’s serial number, if the method is “By router admin password”, the “Authorization key” is the router’s admin password. The "Authorization key” must precede the activation text and they must be separated by a space symbol. For example, if the chosen Authorization method is “By router admin password” and the password is “admin01”, the entire message should look like this: “admin01 reboot”. The same applies to “By serial” authorization.

Rule Overview and editing

Every default SMS rule can be edited to your liking. If none of the rules suit your purposes, just click the Edit button next to any SMS Utilities rules. This section will contain information on editing every signle SMS Utilities rule.

Reboot


Above is an example of what an SMS Configuration window looks like, specifically, SMS Configuration for the Reboot rule. Below is a table with detailed explanations on how to configure the rule and what each of the fields mean. To avoid redundancy, screenshots for the other rules will not be provided, since the structures, syntax and the overall look of the configuration windows for each rule are very similar. Instead, only tables containing information on how to edit each rule will be provided.

This field appears only if you have checked Get status via SMS after reboot

 Field Name
 Description  Explanation, Notes
 Enable
 This check box will enable or disable SMS reboot function Allows router restart via SMS
 Action  The action to be performed when this rule is met Reboots the router
 SMS Text
 SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter; Default text: reboot
 Authorization method  What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

 Allowed Users
 White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

 Get status via SMS after reboot Check this to receive connection status via SMS after the reboot If checked, the router will send a status message once it has rebooted and is operational again. This is both a separate SMS Rule and an option under the SMS Reboot rule. After checking this, the Send status SMS to other number field will become available
 Message text
Which status information should be included in SMS:

Data state, Operator, Connection type, Signal Strength, Connection State, IP

You can select which status elements to display

Status

 Field Name  Description  Explanation, Notes
 Enable  This check box will enable or disable SMS status function Allows you to get the router‘s status via SMS. This is both a separate SMS Rule and an option under the SMS Reboot rule
 Action  The action to be performed when this rule is met Returns an SMS message containing information about the status of the router. The type of information contained within the message can be specified in the Message text field
 SMS Text  SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter; Default text: status
 Authorization method  What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

 Allowed Users  White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

 Send status SMS to other number  Enable this if you want the status message to be sent to another (other than the sender) number (s)  If this is checked, you will be prompted to enter a phone number (s)
 Message text  Which status information should be included in SMS:

Data state, Operator, Connection type, Signal Strength, Connection State, IP

 You can select which status elements to display

Get I/O status

 Field Name  Description  Explanation, Notes
 Enable This check box will enable or disable SMS I/O status function Allows you to get the router‘s I/O status via SMS
 Action The action to be performed when this rule is met Returns an SMS message containing information about the Input/Output status of the router
 SMS Text  SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter; Default text: iostatus
 Authorization method  What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

 Allowed Users  White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

 Send status SMS to other number Enable this if you want a status message to be sent to another (other than the sender) number (s)  If this is checked, you will be prompted to enter a phone number (s)

Get OpenVPN status

 Field Name  Description  Explanation, Notes
 Enable This check box will enable or disable the OpenVPN status function Allows to get the router‘s OpenVPN status via SMS
 Action The action to be performed when this rule is met Returns an SMS message containing information about an OpenVPN instance's status
 SMS Text  SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter; Default text: vpnstatus
 Authorization method  What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

 Allowed Users  White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

 Send status SMS to other number Enable this if you want a status message to be sent to another (other than the sender) number (s)  If this is checked, you will be prompted to enter a phone number (s)

Switch WiFi On/Off

 Field Name  Description  Explanation, Notes
 Enable This check box will enable or disable the Switch WiFi function Allows Wi-Fi control via SMS.
 Action The action to be performed when this rule is met Turns WiFi ON or OFF
 SMS Text  SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter;

Default text: wifion to turn WiFi ON; wifioff to turn WiFi OFF

 Authorization method  What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

 Allowed Users  White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

 Write to config Permanently saves Wi-Fi state With this setting enabled, the router will keep the new Wi-Fi state even after reboot.

If it is not selected, the router will revert the Wi-Fi state after reboot

Switch mobile data ON/OFF

 Field Name  Description  Explanation, Notes
 Enable This check box will enable or disable the Switch mobile data function  Allows mobile control via SMS
 Action The action to be performed when this rule is met  Turn mobile data ON or OFF
 SMS Text SMS text that will trigger the rule  SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter;

Default text: mobileon to turn mobile data ON; mobileoff to turn mobile data OFF

 Authorization method What kind of authorization to use for SIM management  Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

 Allowed Users White list of allowed users  Possible values:

From all numbers | From group | From single number; Default: From all numbers

 Write to config Permanently saves mobile network state With this setting enabled, the router will keep the new mobile data state even after reboot.

If it is not selected, the router will revert the mobile data state after reboot


Manage OpenVPN

 Field Name  Description  Explanation, Notes
 Enable This check box will enable or disable the Manage OpenVPN function Allows OpenVPN control via SMS
 Action The action to be performed when this rule is met Turns an OpenVPN instance ON or OFF
 SMS Text  SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default: vpnon to turn OpenVPN ON; vpnoff to turn OpenVPN OFF

After the SMS text you have to write OpenVPN instance‘s name, e.g., "vpnon client_Client1"

 Authorization method  What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

 Allowed Users  White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers


Get list of profiles

 Field Name  Description  Explanation, Notes
 Enable This check box will enable or disable the Get list of profiles function Allows you to get the list of profiles via SMS
 Action The action to be performed when this rule is met Sends you the list of existing profiles
 SMS Text  SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default text: profdisp

 Authorization method  What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

 Allowed Users  White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers


Change profile

 Field Name  Description  Explanation, Notes
 Enable This check box will enable or disable the Change profile function Allows changing profiles via SMS
 Action The action to be performed when this rule is met Changes the current profile to the one specified in the message
 SMS Text  SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default text pr

After the SMS text you have to write the Profile's name, e.g., "pr John"

 Authorization method  What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

 Allowed Users  White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

SSH access Control

 Field Name  Description  Explanation, Notes
 Enable  This check box will enable or disable the SSH access control function  Allows SSH access control via SMS
 Action  The action to be performed when this rule is met.  Turns SSH access ON or OFF
 SMS Text  SMS text that will trigger the rule  SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default text: ssh
 Authorization method  What kind of authorization to use for SIM management  Possible values:
No authorization | By serial | By router admin password; Default: By router admin password
 Allowed Users  White list of allowed users  Possible values:
From all numbers | From group | From single number; Default: From all numbers
 Enable SSH access  Enables or Disables SSH access from LAN  If this is checked, SMS will enable SSH access from LAN, if not, SMS will disable SSH access from LAN
 Enable remote SSH access  Enables or Disables SSH access from WAN  If this is checked, SMS will enable SSH access from WAN, if not, SMS will disable SSH access from WAN


  • Note that by default the ssh rule will enable both local and remote SSH access. You can change how the rule acts by clicking the "Edit" button located next to it:

  • In the next window you can customize whether the rule will turn local/remote SSH access ON or OFF:

If you are using this rule frequently, we suggest that you create a new custom rule. For example, you can use the default rule to turn SSH access ON and use the custom rule to turn SSH access OFF. You can create new SMS Utilities rules from the New SMS Rule section located at the bottom of the SMS Utilities page.

Web access Control

 Field Name
 Description  Explanation, Notes
 Enable
This check box will enable or disable the Web access control function Allows Web access control via SMS
 Action The action to be performed when this rule is met. Turns access to WebUI ON or OFF
 SMS text
SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default text: web
 Authorization method What kind of authorization to use for SIM management Possible values:
No authorization | By serial | By router admin password; Default: By router admin password
 Allowed users
White list of allowed users Possible values:
From all numbers | From group | From single number; Default: From all numbers
 Enable HTTP access Enables or Disables HTTP access from LAN If this is checked, SMS will enable HTTP access from LAN, if not, SMS will disable HTTP access from LAN
 Enable remote HTTP access Enables or Disables HTTP access from WAN If this is checked, SMS will enable HTTP access from WAN, if not, SMS will disable HTTP access from WAN
 Enable remote HTTPS access Enables or Disables HTTPs access from WAN If this is checked, SMS will enable HTTPS access from WAN, if not, SMS will disable HTTPS access from WAN

  • Note that by default the web rule will enable both local and remote HTTP access as well as remote HTTPS access. You can change how the rule acts by clicking the "Edit" button located next to it:

  • In the next window you can customize whether the rule will turn local/remote HTTP/HTTPS access ON or OFF:

If you are using this rule frequently, we suggest that you create a new custom rule. For example, you can use the default rule to turn HTTP/HTTPS access ON and use the custom rule to turn HTTP/HTTPS access OFF. You can create new SMS Utilities rules from the New SMS Rule section located at the bottom of the SMS Utilities page.

Restore to default

 Field Name
 Description  Explanation, Notes
 Enable  This check box will enable or disable the Restore to default function  Allows you to restore the router to its default settings via SMS
 Action  The action to be performed when this rule is met.  Executes a router Reset, which means the router will reboot after this rule is executed and all custom configurations will be deleted and restored to default
 SMS text
 SMS text that will trigger the rule  SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default text: restore

 Authorization method  What kind of authorization to use for SIM management  Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

 Allowed users
 White list of allowed users  Possible values:

From all numbers | From group | From single number; Default: From all numbers


Force FW upgrade from server

 Field Name  Description  Explanation, Notes
 Enable  This check box will enable or disable the FW upgrade from server function  Allows you to upgrade the router‘s FW via SMS
 Action  The action to be performed when this rule is met.  Upgrades your router's current Firmware to the one uploaded and assigned to your router in FOTA. The router will reboot and be unreachable for a couple of minutes after this rule is executed
 SMS text  SMS text that will trigger the rule  SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default text: fw_upgrade

 Authorization method  What kind of authorization to use for SIM management  Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

 Allowed users  White list of allowed users  Possible values:

From all numbers | From group | From single number; Default: From all numbers


Force Config update from server

 Field Name  Description  Explanation, Notes
 Enable  This check box will enable or disable the Config update from server function  Allows you to load a different configuration file on to your router via SMS
 Action  The action to be performed when this rule is met. Upgrades your router's current Configuration to the one uploaded and assigned to your router in FOTA. The router will reboot and be unreachable for a couple of minutes after this rule is executed
 SMS text  SMS text that will trigger the rule  SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default text: config_update

 Authorization method  What kind of authorization to use for SIM management  Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

 Allowed users  White list of allowed users  Possible values:

From all numbers | From group | From single number; Default: From all numbers


Switch monitoring ON/OFF

 Field Name  Description  Explanation, Notes
 Enable  This check box will enable or disable the Switch monitoring function  Allows you to control monitoring status via SMS
 Action  The action to be performed when this rule is met  Turns remote monitoring ON or OFF
 SMS text  SMS text that will trigger the rule  SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default text: monitoringon to turn remote monitoring ON; monitoringoff to turn remote monitoring OFF;

 Authorization method  What kind of authorization to use for SIM management  Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

 Allowed users  White list of allowed users  Possible values:

From all numbers | From group | From single number; Default: From all numbers


Monitoring status

 Field Name  Description  Explanation, Notes
 Enable  This check box will enable or disable the Monitoring status function  Allows you to get monitoring status via SMS
 Action  The action to be performed when this rule is met  Returns a text message containing information about remote monitoring status
 SMS text  SMS text that will trigger the rule  SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default text: monitoring_status

 Authorization method  What kind of authorization to use for SIM management  Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

 Allowed users  White list of allowed users  Possible values:

From all numbers | From group | From single number; Default: From all numbers


Switch output ON/OFF

 Field Name  Description  Explanation, Notes
 Enable This check box will enable or disable the Switch output function  Allows output control via SMS
 Action  The action to be performed when this rule is met  Returns a text message containing information about remote monitoring status
 Active timeout Make the rule active for a specific time;

format: seconds

Example: if you configure a rule to turn a specific output on and set a 30 s timeout, the output will activate once the router receives the SMS messages and then it will deactivate after a period of 30 s
 SMS text  SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default text: " "

 Authorization method  What kind of authorization to use for SIM management  Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

 Allowed users  White list of allowed users  Possible values:

From all numbers | From group | From single number; Default: From all numbers

 Output type Which output will be activated (RUT240 routers only have one output, so this value will always be Digital OC Output) Possible values:

Digital OC output | Relay output; Default: Digital OC output


NOTE: No default SMS text is provided for this rule. It can be created via the New SMS Rule tab.

MORE

 Field Name  Description  Explanation, Notes
 Enable This check box will enable or disable the WOL rule Provides the possibility to wake computers from sleep mode
 Action The action to be performed when this rule is met Wakes the specified computer from sleep mode
 SMS text  SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default text: none

 Authorization method  What kind of authorization to use for SIM management  Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

 Allowed users  White list of allowed users  Possible values:

From all numbers | From group | From single number; Default: From all numbers


WOL

 Field Name  Description  Explanation, Notes
 Enable This check box will enable or disable the MORE rule Provides the possibility to see the next part of the message
 Action The action to be performed when this rule is met Returns a text message containing the next part of the message
 SMS text  SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default text: more

 Authorization method  What kind of authorization to use for SIM management  Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

 Allowed users  White list of allowed users  Possible values:

From all numbers | From group | From single number; Default: From all numbers

 MAC Address
 Computer's MAC Address Possible values: mac; Default: none

NOTE: No default SMS text is provided for this rule. It can be created via the New SMS Rule tab.

Change mobile data settings (cellular) rule

The Change mobile data settings rule is exceptional to most of the other rules as it does not perform a single action like turning specific services On/Off or getting status updates. It designed to change mobile data settings and it's SMS text can't be described by a single string because the message depends on what configurations you want to change. For example, you can send a message that will change your APN only, you can send a message that will change APN and mobile service mode, or even a message that will change every single mobile setting.

Change mobile data settings

 Field Name  Description  Explanation, Notes
 Enable  This check box will enable or disable the Change mobile data settings function  Allows you to change mobile settings via SMS
 Action  The action to be performed when this rule is met  Changes the specified mobile settings
 SMS text  SMS text that will trigger the rule  SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default: cellular

Detailed explanations on how to use this function are presented in the table below

 Authorization method  What kind of authorization to use for SIM management  Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

 Allowed users  White list of allowed users  Possible values:

From all numbers | From group | From single number; Default: From all numbers


The default SMS text for the Change mobile data settings rule is cellular but it is only an indication text and does not include any specific parameters to be changed. The list of parameters that can be changed and explanations on how to incorporate them into the "cellular" message is presented in the table below.

Mobile Settings via SMS Parameters

 PARAMETER  VALUE  DESCRIPTION  DEFAULT MESSAGE EXAMPLE
 apn=  e.g., internet.gprs  Sets APN  cellular apn=internet.gprs
 dialnumber=  e.g., *99***1#  Sets Dialing number  cellular dialnumber=*99***1#
 auth_mode=  none | pap | chap  Sets Authentication method  cellular auth_method=pap
 service=  2gonly | 3gonly | 4gonly | auto  Sets the mobile Service mode  cellular service=auto
 username=  e.g., user  Sets the user name for PAP or CHAP authentication  cellular username=user
 password=  e.g., pass  Sets the password for PAP or CHAP authentication  cellular password=pass
 roaming=  0 for OFF; 1 for ON  Turn Mobile data roaming ON or OFF  cellular roaming=0

Each of the above examples contain a single parameter but you can send out multiple parameters in one message. For example, "cellular apn=internet.gprs service=3gonly". This message would set your APN to "internet.gprs" and you Service mode to 3G Only. You can also send a message that would include all of the parameters above: "cellular apn=internet.gprs dialnumber=*99***1# auth_mode=pap service=3gonly username=user password=pass"

UCI API rule

The UCI rule lets you set or get any parameter from the router's configuration files.

UCI API

 Field Name  Description  Explanation, Notes
 Enable  This check box will enable or disable the UCI API function  Allows you to set or get any configurations from the router
 Action  The action to be performed when this rule is met  Sets or sends you any specified configurations of the router
 SMS text  SMS text that will trigger the rule  SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default text: uci

Detailed explanations on how to use this function are presented in the table below

 Authorization method  What kind of authorization to use for SIM management  Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

 Allowed users  White list of allowed users  Possible values:

From all numbers | From group | From single number; Default: From all numbers


The following are syntax examples for the UCI API rule:

UCI API Syntax
 Syntax  Description  Default Message Example
 uci get config.section.option"  Returns config option value  uci get network.wan.ipaddr - returns the router's WAN IP address
 uci set config.section.option="value"  Sets config option  uci set wireless.wifi-iface.key="12345678" - sets WiFi interface's password to 12345678
 uci show config  Returns the contents of a config file  uci show openvpn - returns the contents of the openvpn config file
 uci show config.section  Returns the exact part of a config file (either section or the exact option value)  uci show network.ppp - returns the contents of the ppp interface section from the network config file

As you can see, the UCI rule requires that you know the names of the configuration files and the names of the sections and parameters that they hold.

Custom Rules

If default rules do not suit your purposes, you can also configure custom SMS rules. To do so, go to the bottom of the SMS Utilities page, where you will find the New SMS Rule tab. Select an Action and press the Add button located next to it.

Configuring a new rule is very similar to editing default rules: you are provided with a list of Actions, other fields are generated in accordance with which Action you choose.


Call Utilities

Just like SMS Utilities, Call Utilities provide you with the possibility to issue certain commands to the router from your mobile phone. The list of possible rules is of course shorter because you can only make one type of call. Keep that in mind when creating Call Utilities rules because one call will trigger all of the enabled rules at once.

There is only one default rule (Reboot) configured and it is disabled. To make a new rule click the Edit button located next to the one default rule or make an entirely new entry for you Call Rules list by adding a rule from the New Call Rule tab.

Call Configuration

The Call Configuration window is similar to SMS Configuration, but less complex.


 Field Name  Description  Explanation, Notes
 Enable  yes | no; Default: no  Allows router's Call rules
 Action  Reboot | Send status | Send WiFi | Send mobile data | Send output; Default: Reboot  The action to be performed when this rule is met
 Allowed Users
 From all numbers | From group | From single number; Default: From all numbers  White list of allowed users
 Get status via SMS after reboot  yes | no; Default: no  If checked, the router will send a status message once it has rebooted and is operational again
 Message text  string; Default: Router name - %rn; WAN IP - %wi; Data Connection state - %cs; Connection type - %ct; Signal Strenght - %ss; New FW available - %fs;  Which status information should be included in SMS:

Data state, Operator, Connection type, Signal Strength, Connection State, IP


User Groups

User Groups provides you with the possibility to group phone numbers for SMS management purposes. You can then later use these groups in all related SMS and call functionalities. This option helps if there are several Users who should have the same roles when managing the router via SMS or calls. You can create a new user group by entering a name in the Group name text field and clicking the Add button located next to it in the Create New User Group section. After this you will re redirected get to the Modify User Group section.


 Field Name  Description  Explanation, Notes
 Group name  string; Default: " "  Name of the group of phone numbers. Used for easier management purposes
 Phone number  phone number; Default: " "  Add numbers to the user group. Must match international format. You can add more phone number fields by clicking on the green symbol


SMS Management

With the help of the SMS Management window you can read and send SMS messages.

Read SMS

In the Read SMS tab you can read and delete received/stored SMS messages. The layout is simple, there is a list of received SMS messages and you can choose how many entries of that list should visible at one time with SMS per page drop box in the top left corner of the page and there is a Search field to help you navigate more efficiently through the list of messages in the top right corner of the page.


Send SMS

The Send SMS tab lets you send SMS messages from the router‘s SIM card.


All you have to do is enter the recipient’s phone number, type in your message and hit the Send button. If everything went well, a green bar saying Message sent should appear (image below).


Storage

The Storage tab shows you how much SIM card memory space is used and how much is still available. You can also chose the option for the router to not delete messages. If this option is not used, the router will automatically delete all incoming messages after they have been read. Message status read/unread is examined every 60 seconds. All read messages are deleted.


Statistics

The Statistics page represents information about sent and received SMS messages of both SIM cards. The counters can be reset by clicking the Reset button next to each SIM card.