The User Scripts function allows users to write their own
shell scripts that will be executed during the router's booting process.
This page is an overview of the User Scripts function in BEAM iSERIES
routers.
The information in this page is updated in accordance with the BEAM-OS-R firmware.
Startup Script Management
The startup script management section shows the contents of the /etc/rc.local
file and allows the user to edit it. This scripts written in this file
are executed at the end of the device's start up process. You can also
execute the script via a command line interface with the following command:
sh /etc/rc.local
The figure below is an example of the startup script management section:
|
|
