BEAM iSERIES Remote Monitoring and Administration


The BEAM iSERIES supports multiple monitoring and administration possibilities.


Remote Control Options

The BEAM iSERIES automotive routers supports the following remote control capabilities:

 Remote control method
Can get parameters
Can set parameters
 RMS
 SSH
 HTTP
 SMS
 JSON-RPC
 VPN

RMS

The Remote Management System (RMS) is designed to conveniently monitor and manage all your BEAM iSERIES devices. The system allows to securely gather status information of your devices and to change their configuration even if the devices do not have public IP addresses.

RMS access can be configured from the SystemAdministrationRMS page.


Public IP

If you're using a SIM card that has a Public IP address (refer here for more information), you can reach the router via HTTP or SSH via its WAN IP address.

HTTP Access

Remote HTTP access can be set up via the SystemAdministrationAccess Control page.

SSH Access

Remote SSH access can be set up via the SystemAdministrationAccess Control page.


SMS

The BEAM iSERIES can be controlled via SMS messages using SMS utilities rules. SMS can be configured via the ServicesSMS UtilitiesSMS Rules page.


JSON-RPC

JSON-RPC access can be set up via the SystemAdministrationAccess Control page.


VPN

Virtual Private Networks (VPNs) provide multiple flexible options on setting up remote access to the router and its LAN network. For more information on different types of VPNs supported by the BEAM iSERIES, visit the VPN manual page.